Zte MF60 - Wi-Fi Settings

ZTE MF60 User Manual
24 Confidential and Proprietary Information of ZTE CORPORATION
Authentication Protocol (CHAP) is used to periodically verify the identity of the peer
using a 3-way handshake.
User Name
User name is used to obtain authentication from the ISP when the connection is
established
Password
Password is used to obtain authentication from the ISP when the connection is
established.
Wi-Fi Settings
Station list
Select Settings > Wi-Fi Settings > Station List, the wireless network stations are shown in the following
figure:
Basic
Select Settings > Wi-Fi Settings > Basic, the wireless network basic parameters are shown in the
following figure:
• Network Mode: If all of the wireless devices connect with this device in the same transmission mode,
performance will be improved by choosing the appropriate wireless mode.
• Network Name(SSID): Service Set Identifier(SSID). Enter a string less than 32 characters as the name
for your wireless local area network(WLAN).