Zte MF60 - Page 25

ZTE MF60 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 25
• Broadcast Network Name(SSID): Disable or Enable(Default) this function. If Enable is selected, the
device broadcasts the SSID, and other devices can search and connect to it. When you select Disable,
other devices can not search out the SSID. If you want someone to connect, you need tell them the SSID,
and let them setup manually.
• AP Isolation: When Enabled is selected, each of your wireless clients will not be able to communicate
with each other.
• Country Code: Choose the right country code.
• Frequency(Channel): Choose the appropriate channel to optimize the performance and coverage of
your wireless network.
• Rate: Choose the speed rate.
• MAX Station Number: Choose the maximum number of the stations which connect the AP
simultaneously.
Click Apply to confirm your configuration.
Security
Select Settings > Wi-Fi Settings > Security, the Security parameters are shown in the following figure:
Unless one of these encryption modes is selected, wireless transmissions to and from your wireless
network can be easily intercepted and interpreted by unauthorized users.
• Security Mode: The security modes are described below:
Mode
Description
OPEN
You can authenticate successfully with a SSID, whether it is valid or empty.
SHARED
The WLAN clients who have the same WEP key with wireless gateway can
pass the authentication and access the wireless network.
WPA-PSK
WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII)