Zte MF60 - Page 26

ZTE MF60 User Manual
26 Confidential and Proprietary Information of ZTE CORPORATION
pass-phrase.
WPA2-PSK
It is the securer version of WPA with implementation of the 802.11i standard.
WPA-PSK/WPA2-PSK
Apply both the WPA-PSK and WPA2-PSK scheme.
• WPA Algorithm: TKIP, AES or AUTO.
• Pass phrase: Enter the password manually.
If the Authentication type is SHARED, the bottom part of the configuration page displays parameters as
shown:
• WEP Keys: At most four keys can be set in the blank. Choose the primary key index. The primary key is
the only key in use at a given time. Whatever keys you enter for an access point, you must also enter the
same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match
WEP key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter,
etc. A WEP can be in HEX form either 10 or 26 hexadecimal digits (0~9,a~f and A~F) and in ASCII
form either 5or 13 ASCII code.
If the Authentication type is OPEN, the bottom part of the configuration page displays WPA parameters.