NOTE:
To change the current connection setting, please disconnect from the Internet first.
To modify the parameters of your device, log in to the 4G Mobile Hotspot configuration page.
Configuring Your PC
The following describes how to configure the Internet Protocol in Windows for your Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties.
5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.
Warning and Notice
To the User
If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be
affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices
before using the device if necessary.
Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always
keep the device more than 20 centimeters away from such medical instruments when your device is powered
on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before
using the device if necessary.
Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories,
where there are explosive gases or explosive products being processed. Power off the device if necessary.
Do not use electronic transmission devices in aircraft, at petrol stations or in hospitals. Observe and obey all
warning signs, and power off the device in these conditions.
Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be
affected.
Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such
space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the
device for your safety. In the case of such an event, cool the device in a well-ventilated place before turning on
for normal use.
Keep the device out of the reach of small children. The device may cause an injury if used as a toy.
When the device is operating, do not touch the metallic parts. Failing to do so may cause burns.
To Next Page
Loading...
Need help?
General
