Zte MF97V - Performance and Stability Issues

124
Problem Possible causes Possible solution
If you are not able to
connect to the network,
Spro2 will continue to
send out signals as it
attempts to locate a
base station. Doing so
consumes battery power
and will consequently
shorten standby time.
Change your location to
one where the network
is accessible, or
temporarily turn off your
Spro2.
Cannot turn
Spro2 on
Battery power has been
depleted.
Recharge the battery.
micro-SIM card
malfunction or damage
Take the micro-SIM card
to your service provider
for testing.
micro-SIM card inserted
improperly
Insert the micro-SIM
card properly.
micro-SIM
card error
Debris on the micro-SIM
card contacts
Use a soft, dry cloth to
clean the micro-SIM
card contacts.
The micro-SIM card is
invalid.
Contact your service
provider.
Unable to
connect to
the network
You are not within the
network’s service area.
Check the service area
with your service
provider.