61
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to connect to each other
without the need for wireless access points (hotspots).
NOTE:
Wi-Fi Direct is not completely compatible among different device
manufacturers. You may need to install third-party applications to
share files between different devices from different
manufacturers.
Connect to Another Device via Wi-Fi Direct
1. Touch the Home Key > SETTINGS tab > System >
Network > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to the ON position.
3. Touch the Menu Key > Wi-Fi Direct. Your Spro2 will search
for other devices enabled with Wi-Fi Direct connections.
4. Touch a device name under PEER DEVICES to connect with
it.
The other device will receive a connection prompt and need
to accept the request for connection. Both devices may need
to enter a common PIN.
Once connected the device is displayed as “Connected” in the
PEER DEVICES list.
To Next Page
Loading...
