50
3. Open a Wi-Fi display application on the phone to scan for
available devices within range.
4. When you see the name of your Spro2 (MF97V) displayed in
the available devices section, touch the name. The phone
then automatically tries to pair with your Spro2.
5. Touch Accept on your Spro2. After successful connection,
the contents in the phone will be displayed on the projector.
6. On your phone, choose the content you want to display.
NOTES:
• To end the Miracast link, touch the Back Key of Spro2.
• Press the Power Key twice quickly to adjust projection focus
automatically.
Using Miracast and Mobile Hotspot
Simultaneously
You can use the projector via a Miracast link and share your
mobile data with other devices at the same time.
1. Turn on the Mobile Hotspot function and configure the hotspot
name and security options. See Share Your Mobile Data
Connection as a Wi-Fi Hotspot.
2. Turn Miracast on.
3. Connect your phone or device to Spro2 via Miracast or Mobile
Hotspot as you need.
To Next Page
Loading...
