130
CTIA Requirements
• Do not disassemble or open, crush, bend or deform,
puncture or shred the battery.
• Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or other
liquids, expose to fire, explosion or other hazard.
• Only use the battery for the system for which it is specified.
• Only use the battery with a charging system that has been
qualified with the system per CTIA Certification
Requirements for Battery System Compliance to IEEE 1725.
Use of an unqualified battery or charger may present a risk
of fire, explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive
objects to contact the battery terminals.
• Replace the battery only with another battery that has been
qualified with the system per this standard, IEEE-Std-1725.
Use of an unqualified battery may present a risk of fire,
explosion, leakage or other hazard.
• Promptly dispose of used batteries in accordance with local
regulations.
• Battery usage by children should be supervised.
• Avoid dropping the device or battery. If the device or battery
is dropped, especially on a hard surface, and the user
suspects damage, take it to a service center for inspection.
To Next Page
Loading...
