Zte MF97V - Adjusting the Projection

23
NOTE:
For best results, project onto a non-reflective white flat display
surface at a 90° angle to Spro2’s touch screen. The projection
distance of Spro2 is about 3 to 12 feet.
Adjusting the Projection
When the projector is on, you can adjust projection focus,
keystone distortion, projection brightness and projection color.
To adjust projection focus:
1. Touch the Home Key > SETTINGS tab > Projector > Image.
2. In the Focus section, turn on automatic focus or touch “+” and
“-” to make manual adjustment.
NOTE:
You can also press the Power Key twice quickly to adjust
projection focus automatically.
To adjust keystone distortion:
You can adjust keystone distortion to correct image during a tilted
projection.
1. Touch the Home Key > SETTINGS tab > Projector >
Image.
2. In the Keystone section, turn on automatic adjustment or
touch “+” and “-” to make manual adjustment.