20
Powering On/Off Your Spro2
Ensure that the battery is charged.
• Press and hold the Power Key to turn on your Spro2.
• To power it off, press and hold the Power Key to open the
options menu. Touch Power off and then touch OK.
Restarting Your Spro2
If the screen freezes or takes too long to respond, try pressing
and holding the Power Key for about 10 seconds to restart
Spro2.
Waking Up Your Spro2
Your Spro2 automatically goes into sleep mode when it is not in
use for certain time. The touch screen is turned off to save power
and the keys are locked to prevent accidental operations.
You can wake up your Spro2 by following the instruction as
below.
1. Press the Power Key to turn the touch screen on.
2. Touch and hold any area of the screen to unlock Spro2.
NOTE:
If you have set an unlock pattern, a PIN or a password for your
Spro2 (see Protecting Your Spro2 With Screen Locks), you’ll
need to draw the pattern, or enter the PIN/password to unlock
your Spro2.
To Next Page
Loading...
