46
Projecting an HDMI Source
You can project contents via an HDMI cable when connecting
your Spro2 to a laptop/PC or TV STB (Set Top Box). If you have
an Apple device with the Lighting connector, you need to get a
Lightning Digital AV Adapter (not included in the packaging).
1. Connect your Spro2 to the laptop/PC or TV STB via the
supplied HDMI cable. (Laptop/PC or TV STB is not included
in the packaging.)
For Apple devices with the Lighting connector, connect the
device to the HDMI cable with the Lightning Digital AV
Adapter, and then connect the HDMI cable to Spro2.
2. Turn on the projector. See Turning On/Off the Projector.
3. Swipe down the status bar at the top of the screen and touch
HDMI to highlight it.
To Next Page
Loading...
