58
Forget a Wi-Fi Network
You can make your Spro2 forget about the details of a Wi-Fi
network that you added - for example, if you don’t want your
Spro2 to connect to it automatically or if it is a network that you
no longer use.
1. Touch the Home Key > SETTINGS tab > System >
Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Wi-Fi network name and then touch Forget.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your Spro2 to the access points which support WPS.
You can use one of the following methods to connect your Spro2
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Touch the Home Key > SETTINGS tab > System >
Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch .
4. Press the WPS button on the wireless router and the
access point will recognize your Spro2 and add it to the
network.
To Next Page
Loading...
