74
Or, if the device supports Wi-Fi Protected Setup, touch the
WPS icon on the device, and then touch on your Spro2.
NOTE:
To stop sharing your data connection, turn off Mobile Hotspot.
Set Your Wi-Fi Hotspot
You can change the name of your Spro2's mobile hotspot (SSID),
secure it with a password, and set other options.
1. Touch the Home Key > SETTINGS tab > System > Network
> Mobile Hotspot.
2. Touch CONFIGURE and set the following options as follows.
f Network Name: Enter or edit a network name that other
devices see when scanning for Wi-Fi networks.
f Wi-Fi band: Set the band that the mobile hotspot should
be available on.
f Channel: To avoid interference with other Wi-Fi networks,
try using a different channel.
f Security: Choose a security option: None (not
recommended) or WPA2 PSK (other users can access
your mobile hotspot only if they enter the correct
password). When you select WPA2 PSK, touch the
Password field to edit the security password.
f Show password: Check this option to display the
password in the Password field.
To Next Page
Loading...
