Zte MU5001 - Access the Internet

5
4. Start Your Device
Press and hold the power buttonuntil the screen lights up and
thenthe device will connect to the Internet automatically.
NOTE:
If the battery is extremely low, you may be unable to power on
the device.Please charge your device first.
6
5. Access the Internet
 Wi-Fi:The default Wi-Fi SSID and password can be found
on the device label. Connect to the Wi-Fi network with your
mobile deviceand then access the Internet.
NOTE:
You can touch the screen to view the default Wi-Fi SSID and
password.
 USB Type-C cable: Connect with the computer via USB
port and then access the Internet.
7
 Network cable: Connect with the computervia a network
cable and then access the Internet.
8
6. Change Your Device Settings
You can change the device settings by logging in to the
5GMobile Hotspot configuration web page.
1. View the label on your device to get thedefault Device
Manager Website IP addressandPassword.
2. Launch the Internet browser. Enter the Device Manager
Website IP address in the Address bar.
3. Input the Password and then click Login.
4. After the 5GMobile Hotspot configuration web page is
opened, you can change the default settings.
NOTE:
You can also change some settings by touching the screen.