Zte MU5001 - Troubleshooting

9
Touch ScreenIcons and Interfaces
10
1.
External antenna
connector
Connect the antenna if necessary.
2.
Power button
Press and hold for about 2 seconds to power
on your device.
3.
nano-SIM card
tray
Insert your nano-SIM card.
4.
Touch screen
icons
Description
Network signal strength
Network type
New SMS
Battery power level
Settings:
Touch to configure the device settings.
Wi-Fi:
Touch to configure the Wi-Fi settings.
Show the number of connected users.
Connected with your computer via a network
cable.
Connected with your computer via a USB
Type-C cable.
5.
LAN port(RJ45) Connect to the computer.
11
6.
Charging/USB
Type-C jack
Charge the device or connect to the USB port
of a computer.
12
Troubleshooting
Problem Recommended Action
The
connection
between your
device and a
PC through a
USB cable
cannot be
established
automatically.
If the driver of your device is abnormal,
reinstall the software. You need to
uninstall the software first.
The
connection
between your
device and a
client through
Wi-Fi cannot
be
established.
 Ensure that the Wi-Fi function is
enabled.
 Refresh the network list and select
the correct SSID.
 Check the IP address, and ensure
that your client can automatically
obtain an IP address.
 Enter the correct network key (Wi-Fi
password) when you connect the
client to your device.