Zte MU5001 - Getting Started Manual

1
MU5001
Let’s Go
Getting started with your device.
2
1. Prepare
 A valid nano-SIM card.
 Open the back cover and view the label in the battery slot to
get the default information.The following figure is for
reference only.
3
2. Install the Battery
1. Open the back cover.
2. Insert the battery.
3. Put the cover back.
4
3. Insert the nano-SIM Card
1. Insert the tip of the tray eject tool into the hole.
2. Pull out the card tray and place the nano-SIM card on the tray,
as shown. Carefullyslide the tray back into place.