Zte NetNumen U31 R06 - Page 108

NetNumen™U31R06HardwareInstallationGuide
d.SettheshelfswitchinAreaBoftheuniedPDUto"ON".Repeatstepsb.toc.to
verifythattheinputvoltageoftheshelfisnormal.
3.Checktheoperatingstatusoftheshelf.
a.SettheswitchoftheNPEMto"ON".
b.Checkthestatusoftheindicatorsontheshelfcomponents.
lTheH/SindicatorontheNewFanControllerModule(NFCM)ashesblue
severaltimesandgoesoff,andthentheRUNindicatorashesgreen.
lTheH/SindicatorontheNPEMashesblueseveraltimesandgoesoff,and
thentheOKindicatorashesgreen.
lTheHOSTindicatorontheNewChassisManagementModule(NCMM)is
ashinggreen.TheACTindicatorsontheactiveboardsarelit,whilethe
ACTindicatorsonthestandbyboardsarenotlit.
lTheOKindicatorontheNCDMboardislit.
4.Powerontheboardandchecktheboardoperatingstatus.
Note:
Iftheboardcannotbepoweredonorthememoryisdecreasedafterpower-on,verify
thattheboardmemorybarisproperlyinstalled.
a.Closethehandlesoftheswitchboardsinsequencetopowerontheboards.
TheH/Sindicatorontheswitchboardashesblueseveraltimesandgoesoff,and
thentheOKindicatorashesgreen.
b.Closethehandlesofthegeneralprocessingboardsinsequencetopoweronthe
boards.
TheH/Sindicatoronthegeneralprocessingboardashesblueseveraltimesand
goesoff,andthentheOKindicatorashesgreen.
–EndofSteps–
13-4
SJ-20141121113158-006|2014-12-20(R1.0)ZTEProprietaryandCondential