NetNumen™U31R06HardwareInstallationGuide
Figure5-36ConnectingNeighboringCabinets
1.Junctionkit
2.M4×12combination
screw
13.Verifythatthehorizontalandverticaldeviationsofcabinetsinarowareinan
acceptablerange.
Thedeviationshouldbelessthan3mm.Ifitdoesnotmeettherequirement,adjust
cabinets.
14.(Optional)Installashockproofassemblyonthecabinetifnecessary.
lFortheshockproofassemblyinstallationwhenalltheinstallationholesareunder
thecableladderintheequipmentroom,seeFigure5-37.
5-28
SJ-20141121113158-006|2014-12-20(R1.0)ZTEProprietaryandCondential