Zte Unite II - Accessing the Internet; Disconnecting from the Internet; Navigating the Device; Resetting Your ZTE Unite TM II

ZTE Unite
TM
II User Manual
8 Confidential and Proprietary Information of ZTE CORPORATION
Accessing the Internet
1. Switch on the device.
2. Connect the client to your device.
3. After the client is connected to your device successfully, you can access the Internet.
Disconnecting from the Internet
Log into the Web User Interface Configuration page, click the Disconnect button at the Home
page.
NOTE:
Powering off the device can also terminate the Internet connection.
Navigating the Device
Press and hold the Power button to turn on the ZTE Unite
TM
II. The screen lights up to indicate
the device has turned on and the following icons will appear after initialization.
Resetting Your ZTE Unite
TM
II
Simply press and hold the Reset button on right side of the device bottom surface for 3 seconds to restore