Zte Unite II - Device Info; Connection Info; Connected Device; Settings

ZTE Unite
TM
II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 9
your ZTE Unite
TM
II to the factory default settings, as shown below.
Device Info
Select the device Info icon and press the OK Key to check the WAN information. Use the Left and
Right key to view the following information:
 Network Name (SSID): Displays the default SSID.
 Wi-Fi Password: Displays the default Wi-Fi password.
 Web portal Login: Displays the login URL of the web user interface.
 Admin Password: Displays the default login password of the web user interface.
 Mobile Number: Displays your mobile number.
 MEID (H) / IMEI (D): Displays the MEID (H) / IMEI (D).
 Firmware Version: Displays the firmware version.
 Hardware Version: Displays the hardware version.
Connection Info
Select the connection info icon and press the OK Key to check the connection information.
Connected Device
Select the connected device icon and press the OK Key to check the information of the devices
connected to your device.
Settings
Select settings icon and press the OK Key to check the settings. Use the Left and Right key to
scroll to the desired menu.
 Wi-Fi Settings: Enable or disable Wi-Fi function.
 Network Select: Select the network type.
 Software Update: Update the software.
 Sound Alert: Turn on or off the sound alert. It is on by default, so you will hear an alert when there is
one or more device connected to your ZTE Unite
TM
II.
 Screen Timeout: Set time for screen timeout.
 Dial *228: Active your SIM card manually in 1X network.