Zte Unite II - Device Operation Basics; Powering On;Off and Charging the Device

ZTE Unite
TM
II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 3
4. Close the back cover.
Inserting the microSDHC Card
NOTE:
 MicroSDHC logo is a trademark of SD-3C, LLC.
 MicroSDHC card is sold separately.
1. Pull the microSDHC card cover out of the card slot.
NOTE:
Do not remove with excessive force.
2. Insert the microSDHC card into the microSDHC card slot, as shown below. You will hear a click when
the microSDHC card locks in place.
3. Close the microSDHC card cover.
Powering On/Off Your Device
Press and hold the Power button to switch on/off the device.