Enter the IP address of the device you want to communicate with the Internet, and then click Apply to
save the settings.
Router Settings
Select Settings > Router Settings and the router information are shown in the following figure:
• IP Address: IP address for LAN interface.
• Subnet Mask: Subnet mask for the IP address.
• DHCP Server: Enable or disable DHCP Server function.
• DHCP IP Pool: Allocate begin and end IP address for IP pool.
• DHCP Lease Time: Define how long the leased IP address will be expired. The new IP address will be
relocated after the IP address is expired.
Click Apply to confirm your configuration.
Dial *228
This function allows you to active your SIM card manually in a 1X network.
Select Dial *228 and the following page will appear. Click Dial *228 to active your SIM card.
To Next Page
Loading...
