• Source Port: Set the source port of the computer that provides services.
• Destination IP Address: Specify a computer located at LAN to provide services.
• Destination Port: Set the destination port of the computer that provides services.
• Protocol: Set which protocol will be applied by services.
• Comment: Type comment for the port mapping settings.
Click Apply to add a new rule.
Click Delete to delete the rule which you selected.
UPnP
Universal Plug Play (UPnP) is a set of networking protocols that allows network devices, such as PC,
printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other’s
presence on the network and establish functional network services for data sharing, communications, and
entertainment.
Select Settings > Firewall > UPnP and the UPnP settings page is shown in the following figure:
Check Enable and click Apply to enable the function.
DMZ
The DMZ host feature allows one local host be exposed to the Internet for a special-purpose service such
as Internet gaming.
Select Settings > Firewall > DMZ and the following page will appear:
If you select Enable, the DMZ Settings will appear:
To Next Page
Loading...
