Zte Unite II - Wi-Fi Settings

ZTE Unite
TM
II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 17
User Name
User name is used to obtain authentication from the ISP when the connection is
established.
Password
Password is used to obtain authentication from the ISP when the connection is
established.
Wi-Fi Settings
Basic
Select Settings > Wi-Fi Settings > Basic Settings, the wireless network basic parameters are shown in
the following figure:
 Multi SSID Switch: Enable or disable this function. Two SSIDs can be used at the same time.
 Network Name (SSID): Service Set Identifier (SSID). Enter a string less than 32 characters as the
name for your wireless local area network (WLAN).
 Broadcast Network Name (SSID): Disable or Enable (Default) this function. If Enable is selected,
the device broadcasts the SSID, and other devices can search and connect to it. When you select
Disable, other devices cannot see the SSID. If you want someone to connect, you need to tell them the
SSID, and let them setup manually.