Zte Unite II - Page 22

ZTE Unite
TM
II User Manual
18 Confidential and Proprietary Information of ZTE CORPORATION
 AP Isolation: Enable or disable this function. If Enable is selected, the wireless devices connected to
your device will be unable to communicate with each other.
 Security Mode: The security modes are described below:
Mode
Description
OPEN
You can authenticate successfully with a SSID, whether it is valid or empty.
WPA2(AES)-PSK
It is the securer version of WPA with implementation of the 802.11i standard.
WPA-PSK/WPA2-PSK
Apply both the WPA-PSK and WPA2-PSK scheme.
 Wi-Fi Password: Enter the password manually.
 LTE Max Station Number: Choose the maximum number of the stations which connect
to the 4G LTE™ network simultaneously.
 CDMA Max Station Number: Choose the maximum number of the stations which
connect to the CDMA network simultaneously.
Click Apply to confirm your configuration.
Advanced Settings
Select Settings > Wi-Fi Settings > Advanced Settings, the parameters are shown in the following figure:
 Band Selection: Select a band from the drop-down list.
 Network Mode: If all of the wireless devices connect with this device in the same transmission
mode, the performance will be improved when you choose the appropriate wireless mode.
 Channel Bandwidth: Select a channel bandwidth from the drop-down list.
 Country/Region Code: Select the right country code. When using the device internationally,
please change the country/region code.