Frequency (Channel): Select the appropriate channel to optimize the performance and coverage
of your wireless network.
Black List
Select Setting > Wi-Fi Settings > Black List, the Black List configuration is shown in the following
figure:
If you select Enable, the black list page will appear.
All the clients connected to your device are shown in the Device Information area. Click Block behind
the device you want to block and then it will be added to the black list.
Click Delete to delete the device from the black list.
WPS
You can enable Wi-Fi Protected Setup (WPS) by PIN (PIN Code) or PBC (push-button) mode on this
page. If your client device supports WPS, there’s no need to enter password manually when WPS is
available.
Select Settings > Wi-Fi Settings > WPS, the WPS configuration is shown in the following figure:
To Next Page
Loading...
