Internet Access
The wireless adaptor does not require any drivers, and it supports all operating systems with
Ethernet LAN capability, such as Windows 2000, XP, Vista, MAC OS X and Linux.
Notes:
All the parameter settings in this chapter are just for your reference. Please contact your
service provider for detail.
Preparation
Before using the data service, make sure:
• The (U)SIM card is installed into the modem.
• The modem is inserted into the Adaptor.
• The Ethernet cable is connected properly or thw WiFi connection is established.
• The power light is on.
Establishing a connection between your device
and the client
Via Wi-Fi
5. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi LED is on.
6. Use your normal Wi-Fi application on the client to search the available wireless network.
Notes:
You need to check your Wireless Network Connection. Set the client to obtain an IP
address automatically in the Internet protocol (TCP/IP) properties, and the client will
get an IP address like”192.168.0.100”.
7. Select the SSID of your device, and then click Connect.
To Next Page
Loading...
Need help?
General
