Need help?Do you have a question about the Zte WF820+ and is the answer not in the manual?
General| Model | WF820+ |
|---|---|
| Type | 4G LTE Router |
| Wi-Fi Standard | 802.11 b/g/n |
| Frequency Bands | 2.4 GHz |
| Cellular Network | 4G LTE |
| Max Download Speed | 150 Mbps |
| Max Upload Speed | 50 Mbps |
| Antenna Type | Internal |
| Weight | 200 g |
| Power Supply | 12V/1A |
| LTE Category | Category 4 |
| Security | WPA/WPA2 |
| Network Bands | LTE FDD: B1/B3/B5/B7/B8/B20; LTE TDD: B38/B40/B41 |
| SIM Card Slot | Standard SIM |
Introduction to the CPE and important safety symbols for user guidance.
Specifies the minimum system requirements for the computer to use the CPE.
Guides users on accessing and logging into the CPE's web interface for management.
View CPE system status, running time, and product/software version details.
Displays current CPU and memory utilization statistics on the CPE.
Provides 4G network connection status, LAN interface, and Wi-Fi status details.
Displays throughput statistics and lists connected devices with their network details.
Configure Wide Area Network settings, including network mode (NAT/BRIDGE).
Configure LTE network parameters and connection methods (Auto/Manual).
Manages Access Point Name settings for network connectivity.
Manages SIM card PIN verification and PUK unlock procedures.
Configure LAN IP parameters, DHCP server, and MAC-IP address binding.
Configure Demilitarized Zone and static routes for network traffic.
Configure general wireless LAN parameters like mode, channel, and transmit power.
Configure Wi-Fi Protected Setup and SSID profile settings.
Define MAC access policies and manage the Wi-Fi access list.
Configure Wireless Distribution System for extending Wi-Fi network coverage.
Filter network traffic based on MAC addresses.
Filter network traffic based on IP addresses and ports.
Filter network traffic based on Uniform Resource Locators (URLs).
Configure port forwarding rules for network services.
Enable or disable Universal Plug and Play and Denial of Service protection.
Configure VPN connection parameters like protocol, server, username, and password.
View current VoIP and SIP registration status.
Set up the SIP server parameters for VoIP service.
View the current IPv6 status and configuration details.
Configure IPv6 connection type and DNS settings for WAN.
Configure IPv6 auto-configuration type for LAN.
Reboot, factory reset, and configuration backup/restore procedures.
Manage software versions and upgrade CPE/ODU modules.
Configure FTP auto upgrade, TR069, and FOTA settings.
Set system date/time, DST, and configure DDNS.
Use Iperf for performance testing and Diagnosis tools (Ping, Traceroute).
View logs, configure port mirroring, and manage user accounts.
Configure web interface settings like HTTP/HTTPS access and login.
Log out from the web management page.
Answers to common user queries and troubleshooting tips.
Compliance information with FCC rules and radiation exposure limits.
To Next Page
