5.4.3 Deleting Port Forwarding rule
To delete a port forwarding rule, perform the following steps:
1. Choose Security > Port Forwarding.
2. Choose the item to be deleted, and click Delete. As shown in Figure 5-22.
Figure 5-22
5.5 UPnP
On this page, you can enable or disable the Universal Plug and Play (UPnP) function.
To enable UPnP, perform the following steps:
1. Choose Security > UPnP.
2. Set UPnP to Enable.
3. Click Submit. As shown in Figure 5-23.
Figure 5-23
5.6 DOS
On this page, you can enable or disable the DOS function.
Enable DOS, perform the following steps:
1. Choose Security > DOS.
To Next Page
Loading...
