5.2.7 Deleting IP Filtering rule
To delete an IP address filtering rule, perform the following steps:
1. Choose Security > IP Filtering.
2. Choose the rule to be deleted, and click Delete. As shown in Figure 5-14.
Figure 5-14
5.3 URL Filtering
Data is filtered by uniform resource locator (URL). This page enables you to configure URL filtering
rules.
5.3.1 Enabling URL Filtering
To enable URL Filtering, perform the following steps:
3. Choose Security>URL Filtering.
4. Set URL Filtering to Enable.
5. Click Submit. As shown in Figure 5-15.
Figure 5-15
5.3.2 Disabling URL Filtering
To disable URL Filtering, perform the following steps:
1. Choose Security>URL Filtering.
2. Set URL Filtering to Disable.
3. Click Submit. As shown in Figure 5-16.
To Next Page
Loading...
