Figure 7‐2.
7.3 Configuring SIP Account
Before configuring SIP accounts, make sure that the registration server has been properly
configured.
To configure SIP account, perform the following steps:
1. Choose VoIP > SIP Account.
2. Set SIP Account Enable.
3. In the User name and Password boxes, enter the user name and password of the SIP
account provided by your service provider.
4. In the Phone Number box, enter the SIP Phone number provided by your service
provider.
5. In the Display Name box, enter the display name provided by your service provider.
6. In the Codec Priority area, set the codec priority.
7. Click Submit. As shown in Figure 7‐3.
Figure 7‐3
To Next Page
Loading...
