WPA / WPA1/WPA2
If the security mode is WPA / WPA1/WPA2, the configuration page displays s
parameters as shown:
WPA: Clients using WPA with an 802.1X authentication method are accepted for
authentication.
IP Address: Specifies the IP address of the RADIUS server..
Port: The User Datagram Protocol (UDP) port number used by the RADIUS server for
authentication messages.
Shared Secret: A shared text string used to encrypt messages between the access
point and the RADIUS server. Be sure that the same text string is specified on the
RADIUS server. Do not use blank spaces in the string.
Session Timeout: Number of seconds the access point waits for a reply from the
RADIUS server before resending a request.
WEP: Selects WEP keys for data encryption. When enabled, WEP encryption keys
are automatically generated by the RADIUS server and distributed to all connected
clients.
WPA2
If the security mode is WPA2, the configuration page displays s parameters as shown:
To Next Page
Loading...
