Zte WiFi MF20 - System Security Settings

 forward single port virtual server setting: Enable or disable single port virtual
server.
 forward virtual server public port: Set the public virtual server port.
 forward virtual server private port: Set the private virtual server port.
DMZ
Select Firewall > DMZ to setup a De-militarized Zone(DMZ) to separate internal network and
Internet.
 DMZ Settings: Set the DMZ status. Default: Disable.
 DMZ IP Address: Specifies an IP address on the local network allowed unblocked access to
the WAN.
If you select Enable, set the DMZ IP address, and then click <Apply> to confirm your
configuration.
Security
Select Firewall > Security to configure the system firewall to protect AP/Router itself from
attacking.