Zte ZXHN H268A - Page 17

Chapter4ConguretheInternet
1.ClickCreateNewItemtoopenthepageofcreatingnewDSLconnection.
2.EnterthenameoftheWANconnectioninConnectionName.
3.SettheDSLtransfermodetobeATM.
4.ConguretheVPI/VCI.
TheVPI/VCIprovidedbycarriersmustbeset.
5.SettheTypetobeRouting.
6.SettheLinkTypetobeIP.
7.SettheIPVersiontobeIPv4.
8.SettheIPTypetobeDHCP.
9.ClickApplytoapplythechanges.
Whilethedefaultsettingstoremainingparametersshould
performwellinmostcases,somerecongurationsmightbe
requiredtogetthebestperformance.
10.Checktheconguration.
TheIPaddressgettingfromcarriescanverifythattheWANConnectionbased
onIPv4wascompletedsuccessfully.
lStatic(IPv4)congurationprocess
1.ClickCreateNewItemtoopenthepageofcreatingnewDSLconnection.
2.EnterthenameoftheWANconnectioninConnectionName.
3.SettheDSLtransfermodetobeATM.
4.ConguretheVPI/VCI.
TheVPI/VCIprovidedbycarriersmustbeset.
5.SettheTypetobeRouting.
6.SettheLinkTypetobeIP.
7.SettheIPVersiontobeIPv4.
8.SettheIPTypetobeStatic.
9.ConguretheIPv4relevantparameters,includingIPAddress,SubnetMask,
GatewayandDNS1.DNS2andDNS3areoptional.
10.ClickApplytoapplythechanges.
Whilethedefaultsettingstoremainingparametersshould
performwellinmostcases,somerecongurationsmightbe
requiredtogetthebestperformance.
11.Checktheconguration.
Whilethedefaultsettingstoremainingparametersshould
performwellinmostcases,somerecongurationsmightbe
requiredtogetthebestperformance.
lBridgecongurationprocess
1.ClickCreateNewItemtoopenthepageofcreatingnewDSLconnection.
2.EnterthenameoftheWANconnectioninConnectionName.
3.SettheDSLtransfermodetobeATM.
4.ConguretheVPI/VCI.
4-3
SJ-20150916162339-007|2017-02-16(R1.0)ZTEProprietaryandCondential