Zte ZXHN H268A - Canada Regulatory Information; Industry Canada Compliance

ZXHNH268AMaintenanceManagementManual(EXETEL)
ToDothis
DisplaytheDSLlinkinformation
andDSLconnectionstatus
SelectInternet>Status>DSL.
DisplaytheEthernetinterface
informationandconnectionstatus
SelectInternet>Status>Ethernet.
2.ClickRefreshtorefreshtheinformation.
–EndofSteps–
4.1.2ConfiguretheDSLConnection
Thisproceduredescribeshowtocongureabroadbandconnection(WANconnection)on
thenetworkside,sothatthesubscriberscanaccesstheexternalnetwork.
TheZXHNH268AdevicesupportstwoxDSLtransfermodes:ATMandPTM.
ThisproceduretakesATMforexample,andcongurethefourmodesofusingthisDSL
transfermode.
PTMtransfermodecongurationprocessreferstoATMtransfermode
congurationprocess.
CongurationProcess
lPPPoE(IPv4)congurationprocess
1.ClickCreateNewItemtoopenthepageofcreatingnewDSLconnection.
2.EnterthenameoftheWANconnectioninConnectionName.
3.SettheDSLtransfermodetobeATM.
4.ConguretheVPI/VCI.
TheVPI/VCIprovidedbycarriersmustbeset.
5.SettheTypetobeRouting.
6.SettheLinkTypetobePPP.
7.SetthePPPoETransferTypetobePPPoE.
8.ConguretheUsernameandPassword.
Theusernameandpasswordareprovidedbycarriers.
9.SettheIPVersiontobeIPv4.
10.ClickApplytoapplythechanges.
Whilethedefaultsettingstoremainingparametersshould
performwellinmostcases,somerecongurationsmightbe
requiredtogetthebestperformanceaccordingtoopenthecarriers.
11.Checktheconguration.
TheIPaddressgettingfromcarriescanverifythattheWANConnectionbased
onIPv4wascompletedsuccessfully.
lDHCP(IPv4)congurationprocess
4-2
SJ-20150916162339-007|2017-02-16(R1.0)ZTEProprietaryandCondential