Zte ZXHN H268A - Configure the Ethernet Connection; Qos; Configure the Qos Global Parameters; Configure the Qos Classification

ZXHNH268AMaintenanceManagementManual(EXETEL)
ParameterDescription
VLANIDIdentiesaVLAN.Range:0–4094.T oensurenormalservice
operation,theVLANIDmustbethesameasthatsetin
upper-layerconguration.
–EndofSteps–
RelatedTask
SelectInternet>WAN>DSL>DSLModulationParameters.Youcancongurethe
DSLmodulationtypesandenhancecapability.
4.1.3ConfiguretheEthernetConnection
Ethernetcongurationprocessrefersto4.1.2ConguretheDSLConnection.
4.2QoS
4.2.1ConfiguretheQoSGlobalParameters
TheprocedureprovidesthefunctionofQoSswitchandotherglobalparameters
conguration.Packetsthatmatchnoclassicationruleswillbeprocessedaccordingto
openthedefaultpolicyshowedinTheprocedure.
Steps
1.OnthemainpageoftheZXHNH268A,selectInternet>QoS>QoSGlobal
CongurationtoopentheQoSGlobalCongurationpage,asshowninFigure4-3.
Figure4-3QoSGlobalConguration
2.SelectOfftoenabletheQoSfunction.Bydefault,thisfunctionisenabled.Thenclick
Applybuttontoapplythechanges.
–EndofSteps–
4.2.2ConfiguretheQoSClassification
TheprocedureprovidestheparametersofQoSclassicationcongurationfeatures.
4-8
SJ-20150916162339-007|2017-02-16(R1.0)ZTEProprietaryandCondential