Zte ZXHN H268A - Configure the Route; Configure the Routing(Ipv4); Figure 5-18 Routing Table

Chapter5ConguretheLocalNetwork
ParameterDescription
PrexDelegateTypePrexdelegationtype
lAutoSense
Alltheavailableprexeswillbedelegated.
lManual
Oneormoreprexesselectedmanuallyfromallthestatic
prexesconguredbeforewillbedelegated.
13.ClickApplybuttontoapplythechanges.
–EndofSteps–
5.3ConguretheRoute
5.3.1ConfiguretheRouting(IPv4)
Thesectiondescribeshowtocongurerouting(IPv4).
ThegatewayneedstobeconguredforthestaticmodeinterfaceorIPoAmodeinterface
duringstaticroutingconguration.
ThegatewaydoesnotneedtobeconguredforthePPPoEmodeinterfaceduringstatic
routingconguration.
TherelevantinformationofInternetstatusincludesRoutingTableandStaticRouting.
Prerequisite
Beforeconguringstaticrouting,makesurethattheIPv4WANconnectioniscreated.
Steps
RoutingTable
1.OnthemainpageoftheZXHNH268A,selectLocalNetwork>Routing>IPv4to
opentheRoutingTablepage,asshowninFigure5-18.
Figure5-18RoutingTable
2.ClickRefreshtorefreshtheinformations.
StaticRouting
3.ClickStaticRoutingtoopentheStaticRoutingpage,asshowninFigure5-19.
5-13
SJ-20150916162339-007|2017-02-16(R1.0)ZTEProprietaryandCondential