Zte ZXR10 5250-28TC - Table 5-2 System Specifications

ZXR10 5250 Product Description
24
2013 ZTE CORPORATION. All rights reserved
ZTE Confidential Proprietary
Table 5-2 System specifications
Item
ZXR10
5250-28TC
ZXR10
5250-52TC
ZXR10
5250-28SM
ZXR10
5250-52PM
Port
1000
M
24
10/100/1000B
ase-T Ethernet
ports
48
10/100/1000Bas
e-T Ethernet
ports
24 fixed
10/100/1000
Base-X SFP
ports
48
10/100/1000
Base-T X
Ethernet ports
(PoE)
GE/X
G
2 GE Combo
(10/100/1000
Base-T
Ethernet port
or 1000
Base-X SFP
port),2 fixed
1000Base-X
SFP ports
2 GE Combo
(10/100/1000
Base-T Ethernet
ports or 1000
Base-X SFP
ports),2 fixed
1000Base-X
SFP ports
Support two
uplink subcards:
One is 4 fixed
10/100/1000
Base-T Ethernet
port subcard,
the other is 4
fixed 100/1000
Base-X SFP
port subcards
Support uplink
subcard, which
includes 4-port
10G optical,
4-port GE
electrical,
4-port GE
optical ports.
Forwarding
performance
42Mpps
78Mpps
42Mpps
132Mpps
Port
switching
capacity
56Gbps
104Gbps
56Gbps
176Gbps
MAC
Support MAC address learning, aging and conversion from dynamic to
static
Support static MAC address setting
Support MAC address attack protection
Support 16K address table items
VLAN
4k for the whole set
Support port-based VLAN
Support VLAN translation (1:1, N:1)
Support PVLAN
QinQ
Support QinQ-based forwarding
Support ordinary QinQ, outer layer label tagging based on port
Support Selective QinQ, outer layer label tagging based on traffic
Support Selective QinQ inner layer priority mapping
Support TPID modification
LACP
Support dynamic LACP
Support traffic-based load balancing
Storm
suppression
Support broadcasting packet suppression
Support multicast packet suppression
Support unknown packet suppression
Support unknown unicast/multicast packet dropping
Support unknown unicast/multicast broadcasting
L2 multicast
Support IGMP Snooping/proxy
Support IGMP rate limit, IGMP rate filter, and IGMP rate shaping
Support cross-VLAN multicast duplication