Chapter 2 - Product Installation
F I G U R E 4 E T H E R N E T U P L I N K C O N N E C T I O N S
3. Use an RJ-45 cable to connect the W300’s LAN4 port to a computer or
another network device.
4. Connect the power adapter to the device and plug the power adapter to
the AC power outlet. W300 will be on after pushing the power switch bu
tton.
Caution: Please use the companion power adapter. The other power adaptor may mak
e W300 unable to work normally or even damage it.
Proprietary Information of ZTE CORPORATION 9
To Next Page
Loading...
