Zurich ZR13s User Manual

Read all safety warnings and instructions. Failure to follow may result in injury.

Keep these safety instructions for future reference.

Explains functions of buttons like ERASE, SYSTEM MENU, DTC/FF, POWER/LINK.

Explains meanings of Green, Yellow, and Red LEDs for system status.

Describes display elements like I/M Monitor Status, icons, and display areas.

Explains functions of M, LD, UP, ENTER, DOWN buttons.

Identifies the I/M Monitor status area and its icons.

Explains DTC display, sequence, enumerator, system icon, and code type.

Steps for replacing the AA-size batteries in the Scan Tool.

Selecting display language and unit of measurement after battery installation.

Turn ignition off, locate and connect DLC, turn ignition on.

Scan Tool powers on automatically when connected to vehicle's DLC.

Scan Tool establishes communication protocol with the vehicle.

Confirms Vehicle ID (VIN) or allows manual vehicle selection.

Step-by-step process to select vehicle year, make, model, etc.

Scan Tool retrieves DTCs, Monitor Status, and Freeze Frame Data.

Refers to Display Functions for descriptions of LCD elements.

Explains meanings of Green, Yellow, and Red LEDs for system status.

Red LED indicates problems; explains Generic vs. Manufacturer specific DTCs.

Explains Freeze Frame data and the concept of a Priority Code.

Accesses enhanced DTCs, ABS, and SRS DTCs for various manufacturers.

Steps to retrieve OEM enhanced DTCs (except Ford/Mazda).

Refers to Display Functions; explains "No codes present" message.

Procedures for viewing OEM DTCs for Ford/Mazda vehicles.

"One moment please..." message, communication error handling.

Instructions for KOER and KOEO tests for enhanced DTCs.

Retrieves selected DTCs when ABS is chosen from System Menu.

Handles "no codes," "communication error," and exiting enhanced mode.

Retrieves selected DTCs when SRS is chosen from System Menu.

Handles "no codes," "communication error," and exiting enhanced mode.

Handles "Contact Technical Support" and "No SRS DTCs" messages.

Select "All Module Scan" to retrieve DTCs from all vehicle modules.

Displays DTCs recorded for each available vehicle module.

Retrieves DTCs for a selected module, handles errors.

Choose specific modules to scan from the System Menu.

Handles communication errors and modules not supporting DTC reading.

Erases DTCs, Freeze Frame data, and resets I/M Monitors.

Steps for erasing DTCs, warnings about permanent DTCs and service.

Canceling erase, success/failure messages, and DTC impact.

Web-based service for diagnosis, verified fixes, and repair instructions.

Video tutorials, TSBs, safety recalls, and hardware requirements.

Steps to download, install, and log into the RepairSolutions 2 app.

Automatic or manual connection to available WiFi networks.

Confirmation screens and steps for successful WiFi pairing.

View and capture real-time data (sensor values, system status).

Understanding PID data and safety warning for driving tests.

Viewing PIDs in list or graph mode, superimposing graphs.

Selecting specific PIDs to display for customized Live Data.

Options for recording Live Data: DTC Trigger or Manual Trigger.

Selecting PIDs to use for custom Live Data or recording.

Automatically records Live Data when a DTC sets.

Selecting specific PIDs to record when a DTC occurs.

Retrying erase, exiting record function, and engine condition management.

Option to manually trigger Live Data recording at a specific time.

Selecting Continuous Playback or Frame by Frame.

Displaying recorded Live Data, looking for irregularities.

Continuous playback speed, frame scrolling, and exit options.

Analyzing PID values for irregularities and consulting repair manual.

O2 Sensor Test, OBD Monitor Test, EVAP Test overview.

Service Reset, Service Check, Battery/Alternator Test, DLC Locator, etc.

Retrieves and views O2 sensor monitor test results from the vehicle.

Selecting sensors and viewing test results, handling advisories.

Retrieves and displays test results for non-continuously monitored systems.

Interpreting test values against limits (Min/Max) and status.

Initiates an EVAP system leak test.

Steps to reset the Oil Maintenance Light via Service Reset.

Viewing procedures for battery monitor system reset.

Performing OBD service for battery reset (BMW, Ford, Volvo).

Procedures for performing battery reset OBD service.

Displays "Reset Complete" or "Reset Fail" messages.

Checking current engine oil level and oil life.

Steps for performing only a battery check.

Initiating, controlling, and interpreting battery check results.

Steps to perform a charging system check.

Steps for testing the alternator system and interpreting results.

Performing a hybrid/EV battery system check.

Viewing procedures to meet "Enabling Criteria" for monitors.

Retrieving monitor status and selecting procedures.

Shows specific operating procedures for monitors.

Finding the vehicle's Data Link Connector (DLC) location.

Retrieving Vehicle ID, Available Modules, and IPT statistics.

Details on VIN, module ID, calibration IDs, and CVNs.

Lists modules supported by the vehicle under test.

Retrieving IPT statistics for vehicle monitors.

Reference information for Scan Tool functions like Tool Icons, DTC Library.

Explains I/M Monitor Status icons and other informational icons.

Accessing OBD2 DTC definitions by manufacturer and code entry.

Description of green, yellow, and red SYSTEM STATUS LEDs.

Configuring brightness, tone, footers, hotkeys, language, and units.

Steps to adjust the brightness of the display screen.

Enabling/disabling audible tone and navigational footers.

Setting the display language for the Scan Tool.

Setting the unit of measurement to USA or metric.

Returning to the Main Menu from settings.

Data retrieved from vehicles is saved to the Scan Tool's memory.

Viewing DTCs and Live Data stored in memory via Memory mode.

Warranty terms, exclusions, and how to claim.

Contact details for technical support and warranty claims.