Need help?Do you have a question about the Zurich ZR15 and is the answer not in the manual?
General| Live Data | Yes |
|---|---|
| Code Definitions | Yes |
| Graphing | Yes |
| Battery Voltage Check | Yes |
| Internet Updateable | Yes |
| Display | 2.8-inch color LCD |
| OBDII Protocols | J1850 VPW, J1850 PWM, ISO9141 |
| Functions | Read and clear codes, live data, freeze frame, I/M readiness, O2 sensor test, onboard monitor test, vehicle information |
| Multilingual Support | English, Spanish, French |
Read all safety warnings and instructions to prevent electric shock, fire, and injury.
Identifies and describes the buttons, LEDs, and cable of the Scan Tool.
Explains the various fields, icons, and LEDs shown on the Scan Tool's display.
Step-by-step guide to retrieve Diagnostic Trouble Codes (DTCs) from a vehicle.
Accessing and navigating the System Menu for advanced DTCs and tests.
Procedure for clearing Diagnostic Trouble Codes (DTCs) from the vehicle's computer.
Displaying and interpreting real-time vehicle sensor and system data.
Selecting specific Parameter IDs (PIDs) to display in Live Data mode.
Capturing and saving real-time Live Data for later analysis.
Reviewing previously recorded Live Data for troubleshooting.
Overview of diagnostic tests and configuration options accessible from the Main Menu.
Perform active tests on various vehicle actuators and systems across different manufacturers.
Access O2 Sensor, OBD Monitor, and EVAP leak tests for vehicle system diagnostics.
Retrieve and view vehicle identification, available modules, and performance tracking data.
Check the vehicle's battery and alternator system for proper operation.
Configure Scan Tool display, tones, language, and units of measurement.
Procedures for updating the Scan Tool's firmware using PC Link software.
Access and review stored DTCs and Live Data from previously tested vehicles.
Addresses common issues, such as why some codes cannot be erased.
Details the terms and conditions of the product's 90-day limited warranty.
Contact information and procedures for technical support and general inquiries.
To Next Page
