Zurich ZR15 - One-Touch Start Status; (EVAP) Vapor Blocking Valve

Additional Tests
SYSTEM/ACTUATOR TESTS
For technical questions, please call 1-888-866-5797. 49
n An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2. Press ENTER to continue.
n The Gear Commanded by Output
State Control screen displays.
3. Select the gear to be commanded, as
desired, then press ENTER .
n The screen refreshes to show the
Result.
4. Repeat step 3 as desired.
5. Choose Exit to return to the Active Test menu.
One-Touch Start Status
The One-Touch Start Status function lets you enable or disable one-touch
start functionality.
1. Select One-Touch Start Status in the Active Test menu, then press
ENTER .
n An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2. Press ENTER to continue.
n The One-Touch Start Status screen
displays.
3. Select Disabled or Enabled, as desired,
then press ENTER .
n The screen refreshes to show the
Result.
4. Repeat step 3 as desired.
5. Choose Exit to return to the Active Test
menu.
(EVAP) Vapor Blocking Valve
The (EVAP) Vapor Blocking Valve function lets you turn the vapor
blocking valve on or off.
1. Select (EVAP) Vapor Blocking Valve in the Active Test menu, then
press ENTER .
n An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.