USING THE DLC LOCATOR
For technical questions, please call 1-888-866-5797.
81
2. Select Vehicle Information, then press ENTER .
n The Vehicle Information menu displays.
3. Select Available Modules, then press ENTER .
4. When the retrieval process is
completed, a complete list of modules
supported by the vehicle under test
displays.
5. When you have finished viewing the list
of available modules, choose Back (to
return to the Vehicle Information menu)
or Main Menu, as desired.
Viewing In-use Performance Tracking (IPT)
The Scan Tool can retrieve In-use Performance Tracking (IPT) statistics
for monitors supported by the vehicle under test. Two values are returned
for each monitor; the number of times that all conditions necessary for a
specific monitor to detect a malfunction have been encountered
(XXXCOND), and the number of times that the vehicle has been operated
under the specific conditions for the monitor (XXXCOMP). Statistics are
also provided for the number of times the vehicle has been operated in
OBD monitoring conditions (OBDCOND), and the number of times the
vehicle’s engine has been started (IGNCNTR).
1. With the Scan Tool in OBD2 mode, press and release the M button.
n The Main Menu displays.
2. Select Vehicle Information, then press the ENTER
button.
n The Vehicle Information menu displays.
3. Select IPT, then press ENTER .
4. When the retrieval process is completed,
the In-use Performance Tracking
statistics for the vehicle under test
display.
n If In-use Performance Tracking is
not available for the vehicle, an
advisory message displays. Choose
Back (to return to the System Tests
menu) or Main Menu, as desired.
5. When you have finished viewing the statistics, choose Back (to return
to the Vehicle Information menu) or Main Menu, as desired.
RESETTING THE OIL MAINTENANCE LIGHT
1. While linked to the vehicle, press the M button.
n The Main Menu displays.
To Next Page
Loading...
Need help?
General
