SYSTEM/ACTUATOR TESTS
50 For technical questions, please call 1-888-866-5797.
2. Press ENTER to continue.
n The (EVAP) Vapor Blocking Valve screen displays.
3. Select On or Off, as desired, then press
ENTER .
n The screen refreshes to show the
Result.
4. Repeat step 3 as desired.
5. Choose Exit to return to the Active Test
menu.
Output State Control of Torque
Converter
The Output State Control of Torque Converter function lets you select the
operating mode of the torque converter.
1. Select Output State Control of Torque Converter in the Active Test
menu, then press ENTER .
n An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2. Press ENTER to continue.
n The Output State Control of Torque
Converter screen displays.
3. Select Trans Control, Unlock or Lock,
as desired, then press ENTER .
n The screen refreshes to show the
Result.
4. Repeat step 3 as desired.
5. Choose Exit to return to the Active Test
menu.
Fan Speed Desired
The Fan Speed Desired function lets you increase or decrease cooling
fan speed.
1. Select Fan Speed Desired in the Active Test menu, then press
ENTER .
n An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2. Press ENTER to continue.
n The Fan Speed Desired screen displays.
To Next Page
Loading...
Need help?
General
