ADJUSTMENTS, SETTINGS AND LANGUAGE
For technical questions, please call 1-888-866-5797.
91
n Choose Back or Next Page, as appropriate, to view other pages
of the list.
2. When you have finished viewing the descriptions, press M
to return
to the Main Menu.
Using the DTC Library (OBD1)
1. From the Tool Library menu, select DTC
Library, then press ENTER .
n The Select Library screen displays.
2. Select OBD1 Library, then press ENTER
.
n The Select Manufacturer screen
displays.
3. Select the desired vehicle manufacturer, then press ENTER .
n A confirmation message shows.
- If the correct manufacturer is not shown, choose No to return to
the list of vehicle manufacturers.
- If the correct manufacturer is shown, choose Yes.
4. The Enter DTC screen displays.
n The screen shows the code “001,”
with the first character highlighted.
Press UP or DOWN , as
necessary, to scroll to the first digit
of the DTC, then choose Next Digit.
n The selected character displays solid,
and the next character is highlighted.
5. Select the remaining digits in the DTC in
the same way. When you have selected
all the DTC digits, press ENTER to
view the DTC definition.
6. When you have finished viewing the DTC
definition, choose Back to return to the
Enter DTC screen and enter additional
DTCs; or, press M
to return to the Main
Menu.
If a definition for the DTC you entered is not available, an advisory
message shows. Choose Back to return to the Enter DTC screen
and enter additional DTCs; or, press M to return to the Main Menu.
Using the DTC Library (OBD2)
1. From the Tool Library menu, select DTC Library, then press ENTER
.
To Next Page
Loading...
Need help?
General
