Chapter 9 Wireless
AX/DX/EX/PX Series User’s Guide
244
Click Network Setting > Wireless to display the General screen. Select More Secure as the security level.
Then select WPA3-SAE from the Security Mode list if your WiFi client supports it. If you are not sure, select
WPA3-SAE/WPA2-PSK or WPA2-PSK.
Figure 109 Wireless > General: More Secure: WPA3-SAE/WPA2-PSK
The following table describes the labels in this screen.
Table 57 Wireless > General: More Secure: WPA3-SAE/WPA2-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable data encryption.
Security Mode Select a security mode from the drop-down list box.
Generate
password
automatically
Select this option to have the Zyxel Device automatically generate a password. The password
field will not be configurable when you select this option.
Password Select Generate password automatically or enter a Password.
The password has two uses.
1. Manual. Manually enter the same password on the Zyxel Device and the client. You can use
8 – 63 alphanumeric (0-9, a-z, A-Z) and special characters, including spaces.
2. WPS. When using WPS, the Zyxel Device sends this password to the client.
Note: More than 63 hexadecimal characters are not accepted for WPS.
Click the Eye icon to show or hide the password for your wireless network. When the Eye icon is
slashed , you’ll see the password in plain text. Otherwise, it is hidden.
Strength This displays the current password strength – weak, medium, strong.
Click this to show more fields in this section. Click this to hide them.
To Next Page
Loading...
