EMG6726/8726-B10A User’s Guide
248
CHAPTER 28
System
28.1 Overview
In the System screen, you can name your EMG (Host) and give it an associated domain name for
identification purposes.
28.2 The System Screen
Click Maintenance > System to open the following screen.
Figure 162 Maintenance > System
The following table describes the labels in this screen.
Table 116 Maintenance > System
LABEL DESCRIPTION
Host Name Type a hostname for your EMG. Enter a descriptive name of up to 16 alphanumeric characters,
not including spaces, underscores, and dashes.
Domain Name Type a Domain name for your host EMG.
Apply Click Apply to save your changes.
Cancel Click Cancel to abandon this screen without saving.
To Next Page
Loading...
