ZyXEL Communications EMG6726-B10A - The Reboot Screen

Chapter 36 Backup/Restore
EMG6726/8726-B10A User’s Guide
268
Figure 181 Reset Warning Message
Figure 182 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your EMG. Refer to
Section 1.4.5 on page 24 for more information on the RESET button.
36.3 The Reboot Screen
System restart allows you to reboot the EMG remotely without turning the power off. You may need to
do this if the EMG hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the EMG reboot. This does not affect the EMG's
configuration.
Figure 183 Maintenance > Reboot