Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
40
Try to connect to a website to see if you have correctly set up your Internet connection.
4.3 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this
wireless network, the EMG serves as an access point (AP), and the notebook is the wireless client. The
wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the EMG. Then he can set up a wireless network
using WPS (Section 4.3.2 on page 42) or manual configuration (Section 4.3.3 on page 44).
4.3.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a 2.4G wireless network.
1 Click Network Setting > Wireless > WiFi and click the Edit button. Note that you may see one or two
network name(s) displayed on this screen depending on whether you have selected Keep 2.4G and 5G
WiFi network name the same.
WiFi Network Name Example
WiFi Enable
WiFi Security Type WPA2-PSK
WiFi Password DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed
To Next Page
Loading...
