Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
54
Tutorial: Advanced > QoS
2 Click Queue Setup > Add new Queue to create a new queue. In the screen that opens, check Active
and enter or select the following values:
• Name: E-mail
• Interface: WAN
• Priority: 1 (High)
• Weight: 8
• Rate Limit: 5,000 (kbps)
Tutorial: Advanced > QoS > Queue Setup
3 Click Classification Setup > Add new Classification to create a new class. Check Active and follow the
settings as shown in the screen below.
To Next Page
Loading...
